Oil Pan Ver 2.0

I made a detour from the original extended-sump pan I had been working on. That one was brazed together, which I thought would be fine, but the more I looked at it the more uncomfortable I became with both the idea of the sump protruding down further from the pan, and the use of brass in an area that is prone to getting knocked around. So I decided to go with the m10 pickup on the s14 pump. Much easier. And i added in both a windage tray and baffle from Ireland Engineering. I was able to TIG weld the baffle in. The two beads up front in the pic are pretty good, the other two main welds in the rear are sloppy, but it gets the job done.

new pan (ok, very old... but like new.)

windage tray on top, baffle on the bottom:

baffle welded in:

stock oil pump and pickup:

frankensteined s14 pump with m10 pickup bolted to it. You can see the original s14 pickup in the background for comparison:

modified pump bolted up:

windage tray in:

and the pan sprayed with some high temp silver paint: